Robot could make bridge inspections quicker and easier

     RABIT™ (Robotics-Assisted Bridge Inspection Tool) can scan an entire bridge or stretch of roadway without causing it physical harm. (Image courtesy of Rutgers, The State University of New Jersey)

    RABIT™ (Robotics-Assisted Bridge Inspection Tool) can scan an entire bridge or stretch of roadway without causing it physical harm. (Image courtesy of Rutgers, The State University of New Jersey)

    A new robot called the RABIT™ Bridge Deck Assessment Tool could make it easier for Pennsylvania to complete required bridge inspections.

    A new robot called the RABIT™ Bridge Deck Assessment Tool could make it easier for Pennsylvania to complete required bridge inspections.

    Pennsylvania has more than 30,000 bridges, each of which requires biennial safety inspections. To inspect a bridge, workers divert traffic to allow inspection teams to access the necessary areas and inspectors to examine the bridge piece by piece, checking for any superficial changes – peeling paint, rust, cracks – that could indicate problems. For large, complex bridges, the inspection could require many trips, each disrupting traffic and costing bridge owners, like the state, money.

    The RABIT™, which looks like a slightly flattened R2D2 with some sweepers on its front, could make inspecting the bridge deck faster and more comprehensive, using technology that not only sees the surface but can also detect potential issues below the surface. Scott Christie, Deputy Secretary for Highway Administration with the Pennsylvania Department of Transportation, likens it to an X-ray or MRI of an arm or leg, but with bridges as patients. It still needs a traffic-free zone to function, but it works faster than its human counterparts, reducing the time traffic has to be cleared.  

    • WHYY thanks our sponsors — become a WHYY sponsor

    The machine is equipped with various sensors:

    High-definition imaging, to capture images of what the deck surface looks like
    Ultrasonic surface waves, to evaluate the strength of the concrete
    Impact echo, to check for horizontal cracking, and, if found, measure the extent of it
    Electrical resistivity, to measure moisture and evaluate corrosiveness of the deck
    Ground penetrating radar, to detect and evaluate any deterioration subsurface
    GPS, to tag the location of everything the robot finds

    So far there are just two of these robots, developed by the Federal Highway Administration and Rutgers University, but a handful more have been ordered and they’ll eventually be available for agencies to purchase. The RABIT™ visited Allegheny County for a demonstration this summer. There’s a reason it went there.  Pennsylvania has the most structurally deficient bridges in the U.S., about 23 percent of the total according to the Federal Highway Administration, so bridge inspectors in the state keep busy. Christie said PennDOT will be evaluating this technology and the potential return on investment it promises – each machine will cost around $1 million – but says it could be a valuable tool for the agency.  

    Want to know more about Pennsylvania’s bridge problems? Watch for next week’s Keystone Crossroads series about the state’s bridges and possible solutions to get them back into shape.

     

     

     

     

     

     

     

      

    WHYY is your source for fact-based, in-depth journalism and information. As a nonprofit organization, we rely on financial support from readers like you. Please give today.

    Want a digest of WHYY’s programs, events & stories? Sign up for our weekly newsletter.

    Together we can reach 100% of WHYY’s fiscal year goal